Tablet Instructions
53
RNS
®
System Programming Manual
1. Select
N
EUROSTIM
S
ETTINGS
from the
H
OME
screen,
2. On the
N
EUROSTIM
S
ETTINGS
screen, select
P
ATTERN
D
ETECTION
at upper center. The
P
ATTERN
D
ETECTION
screen opens.
Figure 35 Pattern Detection screen
•
The
N
AME
field at upper left identifies the currently active detection set, as indicated by
(
ACTIVE
)
next to the field. You can edit this set or select an inactive set to program by
selecting the
N
AME
field.
Note: To customize the current pattern detection set, do not change the active detection set
shown by default in the N
AME
field at upper left.
•
The upper half of the screen provides tiles to select the current detection patterns and
channels; the tiles are named
P
ATTERNS
A1
&
B1
(upper left) and
P
ATTERNS
A2
&
B2
(upper
right).
•
The lower half of the screen shows thumbnails of all ECoGs (if no filters are on) stored in the
PDMS that were captured using the current recording montage. You can filter the ECoGs
shown using the
T
RIGGERS
and
C
ATEGORIES
menus at left center.
•
The
S
IMULATE
button at upper right (next to
A
DVANCED
) is switched
O
N
(blue) by default,
which enables simulations of detections to be shown on all ECoGs shown on this screen.
3. Select one of the two
P
ATTERN
tiles at the top to access the
D
EFINE
P
ATTERNS
dialog.
Summary of Contents for PDMS 4340
Page 119: ......