Gateway Settings
68
●
Enable port filtering. (See
Port Filtering Panel: Enable Port Filtering
.)
●
Add an application to a port filtering list. (See
Port Filtering Panel: Enable Port Filtering
for an Application
.)
●
Remove an application from the port filtering list. (See
Port Filtering Panel: Disable Port
Filtering for an Application
.)
The following information is displayed.
Item
Description
Port Filtering
Indicates which type of filtering is being used.
●
No Filtering
: All applications are allowed to access the Internet.
●
Black List
: Applications in the list are not allowed to access the
Internet.
List of filtered ports: This list appears only if port filtering is on. Each port displays:
Name
A name describing the application using the port.
Port
The port that the application uses to access the Internet.
Protocol
The protocol (TCP, UDP, etc.) being used by the application.
Actions
Router > Address Reservation
Address reservation lets you specify a specific IP address that the gateway assigns to a
computer or device when it connects to the gateway’s local area network (LAN).
When you specify a reserved IP address for a computer on the gateway’s local area network
(LAN), that computer always receives the same IP address each time it accesses the DHCP
server. Reserved IP addresses should be assigned to servers that require permanent IP
settings.
To reserve an IP address:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
