Your Network Connections
20
●
The Wi-Fi radio is off because someone pressed the Wi-Fi On/Off button on the
gateway.
●
The Wi-Fi security option is WPA Personal, WEP, or WEP-related (for example, “WEP
64 Bit Open”). (WPS is available if the Wi-Fi security option is WPA/WPA2 Personal.)
(See
Wi-Fi Security
.)
●
Broadcast network name is not enabled. (See
Options Tab
.)
●
MAC Filter Mode is “White list (Allow only those in list)”, but no computers have been
added to the list. (See “
Specifying Computers That Can Access the Network
” in
Allowing
or Denying Computers Access to the Network (MAC Filter)
.)
If the maximum number of connected devices on the chosen network (Main or Guest) has
already been met, an error message indicating that the maximum number of devices has been
reached is displayed when you attempt WPS. Disconnect one of the connected devices and
then retry.
You can use the WPS button on the gateway or you can log in to the gateway and use the
Wi-Fi > Connect
page.
Devices Page
The Devices page lets you see lists of devices that are connected to your Main and Guest Wi-Fi
networks.
Note
: These lists are also shown in the
Devices Connected
section on the left side of the
page.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
