Set up a Virtual Private Network (VPN)
104
• Authentication:
Select SHA-1
.
• Key
Group:
Select
DH2 (1024)
.
7. Click the
Advanced
tab.
8. Specify these settings in the Advanced screen:
In the Advanced Features section, select the Mode Config check box and leave the
other settings as shown.
In the X-Auth section, specify how the client user enters credentials:
• To enable a pop-up, select the
X-Auth Popup
check box.
With this setting, the client opens a pop-up window prompting the user to enter
the user name and password.
• To avoid using a pop-up, clear the
X-Auth Popup
check box and type the user
name and password in the Login and Password fields.
Leave the Local ID field and Remote ID field blank.
9. Under the Gateway heading, select
Tunnel
, and click the
IPSec
tab.
10. Specify these settings on the IPSec screen:
In the Address type list, select
Subnet Address
.
In the Remote LAN address and Subnet mask fields, enter the gateway IP address
and subnet mask.
Note:
The gateway and the client’s network must have different subnet ranges that
do not overlap.
In the ESP section, specify the following:
• Encryption.
Select
3DES
.
• Authentication.
Select
SHA-1
.
• Mode.
Select
Tunnel
.
In the PFS section, specify the following:
• Select
the
PFS
check box.
• In the Group list, select
DH2(1024)
.
11. Leave the rest of the tabs with their default values.
12. Click the
Apply
button.
