Set up a Virtual Private Network (VPN)
108
SIT_IDENTITY_ONLY
Initial Contact
Enable MODE_CFG
Request Certificate
Send Certificate
Unique SAs
IKE Fragmentation
●
Leave NAT-T set to
Disable
and the Action after connection timeout set to
Give up
.
16. Close the Edit Connection window. The settings are saved.
17. In the main screen, highlight the connection name and select
Start
.
Once the connection is established, the icon to the right of the connection name turns green.
The client computer can access the LAN-side resources of the gateway including the web
management interface of the gateway.
Set Up a Site-to-Site VPN
This example describes how to set up a site-to-site VPN tunnel between two gateways at
different locations. The LAN subnets of these two gateways must each be in a unique range.
To do this, you must complete the following tasks:
1. Make sure that each gateway uses a different subnet range and that the ranges do not
overlap.
2. Specify the VPN connection for each gateway.
3. Enable the VPN on each gateway.
Specify the Site-to-Site VPN Connection
To specify the VPN connection information:
1. On the first gateway, select
Settings > General > VPN
.
2. In the Site-to-Site VPN configuration section, click the
Edit
button next to the Pre-Shared
Key (PSK) field.
3. Type a unique pre-shared key.
Note:
The key is an alphanumeric string with a maximum length of 32 characters.
