Gateway Settings
80
576
576
Typical value to connect to dial-up ISPs.
Change the MTU Size
The default MTU size usually works, but you can change the MTU size.
To change the MTU size:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
4. Click
Settings > General > WAN Setup
.
5. In the MTU Size field, enter a value from 64 to 1500.
6. Click
Submit
.
LED Settings
By default, the LEDs are on because they are status indicators. You can log in to the gateway
and turn the LEDs off and on.
To turn the LEDs off and on:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type
http://myrouter
.
3. When prompted to log in, enter
admin
for the user name and type the password. (The
default password is
password
.)
4. Click
Settings > General > Device
.
5. Beside
LED
, select
On
or
Off
as desired.)
6. Click
Submit
.
Router Settings
Adjust your gateway’s router settings through the Basic, Port Forwarding, and Port Filtering
pages.
