manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 97

The Node Encryption page includes these three sections:

•

Encryption Status shows whether node encryption is enabled or disabled for the appliance.

•

Key Management Server Details shows information about the KMS being used to encrypt
the appliance. You can expand the server and client certificate sections to view certificate
details and status.

◦

To address issues with the certificates themselves, such as renewing expired certificates,
see the information about KMS in the instructions for administering StorageGRID.

◦

If there are unexpected problems connecting to KMS hosts, verify that the domain name
system (DNS) servers are correct and that appliance networking is correctly configured.

Checking the DNS server configuration

 on page 94

◦

If you are unable to resolve your certificate issues, contact technical support.

•

Clear KMS Key disables node encryption for the appliance, removes the association
between the appliance and the key management server that was configured for the
StorageGRID site, and deletes all data from the appliance. You must clear the KMS key
before you can install the appliance into another StorageGRID system.

Clearing the key management server configuration

 on page 99

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

97

Maintaining the appliance

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands