manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 29

Related reference

Web browser requirements

 on page 13

You must use a supported web browser.

Verifying and upgrading the StorageGRID Appliance Installer version

The StorageGRID Appliance Installer version on the appliance must match the software version
installed on your StorageGRID system to ensure that all StorageGRID features are supported.

Before you begin

You have accessed the StorageGRID Appliance Installer.

About this task

StorageGRID appliances come from the factory preinstalled with the StorageGRID Appliance
Installer. If you are adding an appliance to a recently upgraded StorageGRID system, you might
need to manually upgrade the StorageGRID Appliance Installer before installing the appliance as a
new node.

The StorageGRID Appliance Installer automatically upgrades when you upgrade to a new
StorageGRID version. You do not need to upgrade the StorageGRID Appliance Installer on
installed appliance nodes. This procedure is only required when you are installing an appliance
that contains an earlier version of the StorageGRID Appliance Installer.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

29

Configuring StorageGRID connections

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands