manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 34

•

The Client Network is disabled.

2. Select the link speed for the network ports from the Link speed drop-down list.

The network switches you are using for the Grid Network and the Client Network must also
support and be configured for this speed. You must use the appropriate adapters or transceivers
for the configured link speed. Use Auto link speed when possible because this option
negotiates both link speed and Forward Error Correction (FEC) mode with the link partner.

3. Enable or disable the StorageGRID networks you plan to use.

The Grid Network is required. You cannot disable this network.

a. If the appliance is not connected to the Admin Network, unselect the Enable network

check box for the Admin Network.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

34

Configuring StorageGRID connections

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands