manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 94

•

Select Reboot into StorageGRID to reboot the controller with the node rejoining the grid.
Select this option if you are done working in maintenance mode and are ready to return the
node to normal operation.

•

Select Reboot into Maintenance Mode to reboot the controller with the node remaining in
maintenance mode. Select this option if there are additional maintenance operations you
need to perform on the node before rejoining the grid.

It can take up to 20 minutes for the appliance to reboot and rejoin the grid. To confirm that the
reboot is complete and that the node has rejoined the grid, go back to the Grid Manager. The
Nodes tab should display a normal status 

 for the appliance node, indicating that no alerts

are active and the node is connected to the grid.

Related information

Administering StorageGRID

Checking the DNS server configuration

You can check and temporarily change the domain name system (DNS) servers that are currently
in use by this appliance node.

Before you begin

The appliance has been placed maintenance mode.

Placing an appliance into maintenance mode

 on page 78

About this task

You might need to change the DNS server settings if an encrypted appliance cannot connect to the
key management server (KMS) or KMS cluster because the hostname for the KMS was specified
as a domain name instead of an IP address. Any changes that you make to the DNS settings for the

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

94

Maintaining the appliance

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands