manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 72

•

sites – Site-level configuration operations. You can create, view, delete, and modify a site.

StorageGRID Appliance Installer API

The StorageGRID Appliance Installer API can be accessed over HTTPS from 

Controller_IP:

8443

.

To access the API documentation, go to the StorageGRID Appliance Installer on the appliance and
select Help > API Docs from the menu bar.

The StorageGRID Appliance Installer API includes the following sections:

•

clone – Operations to configure and control node cloning.

•

encryption – Operations to manage encryption and view encryption status.

•

hardware configuration – Operations to configure system settings on attached hardware.

•

installation – Operations for starting the appliance installation and for monitoring installation
status.

•

networking – Operations related to the Grid, Admin, and Client Network configuration for a
StorageGRID appliance and appliance port settings.

•

setup – Operations to help with initial appliance installation setup including requests to get
information about the system and update the primary Admin Node IP.

•

support – Operations for rebooting the controller and getting logs.

•

upgrade – Operations related to upgrading appliance firmware.

•

uploadsg – Operations for uploading StorageGRID installation files.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

72

Deploying a services appliance node

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands