manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 44

Related tasks

Configuring network links

 on page 30

You can configure network links for the ports used to connect the appliance to the Grid Network,
the Client Network, and the Admin Network. You can set the link speed as well as the port and
network bond modes.

Changing the MTU setting

 on page 92

You can change the MTU setting that you assigned when you configured IP addresses for the
appliance node.

Verifying port-level network connections

To ensure that access between the StorageGRID Appliance Installer and other nodes is not
obstructed by firewalls, confirm that the StorageGRID Appliance Installer can connect to a
specific TCP port or set of ports at the specified IP address or range of addresses.

About this task

Using the list of ports provided in the StorageGRID Appliance Installer, you can test the
connectivity between the appliance and the other nodes in your Grid Network.

Additionally, you can test connectivity on the Admin and Client Networks and on UDP ports, such
as those used for external NFS or DNS servers. For a list of these ports, see the port reference in
the StorageGRID networking guidelines.

Note: The Grid Network ports listed in the port connectivity table are valid only for
StorageGRID version 11.5.0. To verify which ports are correct for each node type, you should
always consult the networking guidelines for your version of StorageGRID.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

44

Configuring StorageGRID connections

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands