manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 69

                                                                 

        Client Network:      ENABLED                             

            Bonding mode:    active-backup                       

            VLAN:            novlan                              

            MAC Addresses:   00:a0:98:59:8e:89  00:a0:98:59:8e:81

  Grid Network

    CIDR:      172.16.2.30/21 (Static)

    MAC:       00:A0:98:59:8E:8A      

    Gateway:   172.16.0.1             

    Subnets:   172.17.0.0/21          

               172.18.0.0/21          

               192.168.0.0/21         

    MTU:       1500                   

  Admin Network

    CIDR:      10.224.2.30/21 (Static)

    MAC:       00:80:E5:29:70:F4      

    Gateway:   10.224.0.1             

    Subnets:   10.0.0.0/8             

               172.19.0.0/16          

               172.21.0.0/16          

    MTU:       1500                   

  Client Network

    CIDR:      47.47.2.30/21 (Static)

    MAC:       00:A0:98:59:8E:89     

    Gateway:   47.47.0.1             

    MTU:       2000                  

##############################################################

#####   If you are satisfied with this configuration,    #####

##### execute the script with the "install" sub-command. #####

##############################################################

4. If you need to change any of the values in the current configuration, use the 

configure

subcommand to update them. For example, if you want to change the IP address that the
appliance uses for connection to the primary Admin Node to 

172.16.2.99

, enter the

following:

configure-sga.py configure --admin-ip 172.16.2.99 SGA-INSTALL-IP

5. If you want to back up the appliance configuration to a JSON file, use the 

advanced

 and

backup-file

 subcommands. For example, if you want to back up the configuration of an

appliance with IP address 

SGA-INSTALL-IP

 to a file named 

appliance-SG1000.json

,

enter the following:

configure-sga.py advanced --backup-file appliance-SG1000.json SGA-INSTALL-IP

The JSON file containing the configuration information is written to the same directory you
executed the script from.

Attention: Check that the top-level node name in the
generated JSON file matches the appliance name. Do
not make any changes to this file unless you are an
experienced user and have a thorough understanding
of StorageGRID APIs.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

69

Deploying a services appliance node

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands