manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 91

About this task

Options for changing the Ethernet link configuration of the services appliance include:

•

Changing Port bond mode from Fixed to Aggregate, or from Aggregate to Fixed

•

Changing Network bond mode from Active-Backup to LACP, or from LACP to Active-
Backup

•

Enabling or disabling VLAN tagging, or changing the value of a VLAN tag

•

Changing the link speed

Steps

1. From the StorageGRID Appliance Installer, select Configure Networking > Link

Configuration.

2. Make the desired changes to the link configuration.

For more information on the options, see "Configuring network links."

3. When you are satisfied with your selections, click Save.

Note: You might lose your connection if you made changes to the network or link you are
connected through. If you are not reconnected within 1 minute, re-enter the URL for the
StorageGRID Appliance Installer using one of the other IP addresses assigned to the
appliance: 

https://services_appliance_IP:8443

4. Make any necessary changes to the IP addresses for the appliance.

If you made changes to the VLAN settings, the subnet for the appliance might have changed. If
you need to change the IP addresses for the appliance, follow the instructions for configuring
IP addresses.

Configuring StorageGRID IP addresses

 on page 37

5. Select Configure Networking > Ping Test from the menu.

6. Use the Ping Test tool to check connectivity to IP addresses on any networks that might have

been affected by the link configuration changes you made when configuring the appliance.

In addition to any other tests you choose to perform, confirm that you can ping the Grid
Network IP address of the primary Admin Node, and the Grid Network IP address of at least
one other node. If necessary, return to the instructions for configuring network links, and
correct any issues.

7. Once you are satisfied that your link configuration changes are working, reboot the node. From

the StorageGRID Appliance Installer, select Advanced > Reboot Controller, and then select
one of these options:

•

Select Reboot into StorageGRID to reboot the controller with the node rejoining the grid.
Select this option if you are done working in maintenance mode and are ready to return the
node to normal operation.

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

91

Maintaining the appliance

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands