manualshive.com logo in svg

NetApp SG100, Hardware Installation And Maintenance Manual

Share
Download
NetApp SG100 Hardware Installation And Maintenance Manual Download Page 64

4. Go to the Grid Manager, approve the pending grid node, and complete the StorageGRID

installation process.
When you click Install from the Grid Manager, Stage 3 completes and stage 4, Finalize
Installation, begins. When stage 4 completes, the appliance is rebooted.

Automating appliance installation and configuration

You can automate the installation and configuration of your appliances and configuration of the
whole StorageGRID system.

About this task

Automating installation and configuration can be useful for deploying multiple StorageGRID
instances or one large, complex StorageGRID instance.

To automate installation and configuration, use one or more of the following options:

•

Create a JSON file that specifies the configuration settings for your appliances. Upload the
JSON file using the StorageGRID Appliance Installer.

Note: You can use the same file to configure more than one appliance.

•

Use the StorageGRID 

configure-sga.py

 Python script to automate the configuration of

your appliances.

•

Use additional Python scripts to configure other components of the whole StorageGRID
system (the "grid").

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances 

64

Deploying a services appliance node

Summary of Contents for SG100







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands