36
Zhejiang Neoden Technology Co., Ltd
of the chip, click "point 1", then select the pin center of the upper right foot opposite to left 1, click "point 2", and then click
the middle point. The machine will automatically calculate the center position of the chip.
Light source:
outer ring,middle ring,Inner ring,Mark point generally select to use outer or inner ring,select
corresponding light source according to PCB kind.
Brightness:
Image recognize brightness can be adjusted on the drop-down list.
9. System Setup
If any revision is required, we suggest you contact our engineer to get detailed instruction first. (P.S.
All parameters were set up before shipping, usually no adjustment is required.) This section will
provide a brief introduction for all parameters, to get detailed adjustment instruction, please contact
our technical engineer.
Right buttons functions:
Config save:
to click Save after changing the parameter.
Administrator login:
to prevent any misoperation, this interface will be inactive and greys out. To make it inactive,
Administrator needs to login.
Warning: this part aims at machine’s global parameter settings, any modified
parameter will influence all working files, when modify this part please consider
seriously.
