21
Zhejiang Neoden Technology Co., Ltd
（
2
）
Plug the USB into the machine, do not choose the manual programming, import the processing file by clicking related
layer file import button. The right side click ‘file import top layer’ and the reverse side click ‘file import bottom layer’ . It
will pop up a selecting window, choose the processing file and click save, the information will be imported to the list. (Note:
when import bottom layer, the PCB length(the whole board), need to be set and save before importing, so as to ensure that
the import coordinates will not have negative values). The following figure show the process of importing Toy layer.
Introduction of other functions:
（
1
）
Addition of component: Click ‘New’ , the component list will copy one row from the adjacent row, then modify the
component information.
（
2
）
Delete component: Select the wrong component row, click delete to remove the component.
（
3
）
Movement of component:When editing, sometimes we need to do a slightly adjustment for the edited file, we have
three ways of movement:
Move up: to move the selected component upward.
Move down: to move the selected component downward.
Move to head position: To move the selected component to the first row. Please notice the first row component must be
the same as the first component to place on the PCB.
（
4
）
Convert to current machine coordinate
