22
Zhejiang Neoden Technology Co., Ltd
After finish all editing operation, click convert to current position. It will pop up the above dialogue, click yes, the machine
will recognize the fiducials automatically and convert all component coordinate to machine coordinate. After convert
successfully, it will pop up a dialogue, click align to check if the components’ position are still correct.
（
5
）
Position correction
After mounting, if there is a deviation(deviations are regular and relatively consistent), please click position correction to
enter the new vision page. Click the left mouse button to align the center of the placed component; Click the right mouse
button to align the center of pad. Then correct next one until finish all component and save. The machine will remember the
position after correction. It will fix it automatically at the second placement.
（
6
）
Batch create components
Some circuit boards are relatively regular and easy in real editing situation. For this type of circuit board, we can generate
coordinate in batch , the interface as shown in figure:
