32
Zhejiang Neoden Technology Co., Ltd
(1) Left part is detailed component list, you can get a real-time assembly situation with the varying of the highlight
blue area;
(2) Right top part shows the current assembly speed, you can drag the scroll bar to adjust it(the max is 100%);
(3) Throw and Rate will make a statistics for thrown components and you can check each feeder’s component pick
failure rate and get the information that which kind of component is easily picked failure, then find solution to
improve it.
(4)Log will show some informations like rate of throw component, current average speed and quantity of components
which have been assembled under the current file.
(5)The bottom side 6 display windows are real-time feedback for component recognition images.
(6)Right side buttons’ introduction:
Start: machine starts the current file’s assembly procedure.
Step: operation for each single assembly procedure.
Stop: stop current assembly work.
Exit: after assembly is finished, please directly click this button and back to home interface.
File edit: if the component picking is failed several times or there is big deviation of placement accuracy, the operation
need to be paused. After analyzing the reason, you do not need to exit the assembly interface and just click “file edit”
to modify it. After the modifying is finished, save it and come back to assembly interface.
Config: press this button, a detailed configuration setting interface will pop out as below:
