42
Zhejiang Neoden Technology Co., Ltd
9.3 Basic Configuration
Fig: Basic Configuration
Default Working Speed:
this is adopted by the placement speed in the mounting interface
Mark Camera Brightness and IC Camera Brightness:
they are the default value when coming out from the factory. The
default value for Mark Camera Brightness is 30,and for IC Camera Brightness is 40. They can be adjusted according to the
real situation.
Left Mark Camera Initial Angle,Right Mark Camera Initial Angle,Front IC Camera Initial Angle and Back IC
Camera Initial Angle:
Track Feeding PCB Duration(S):
track forward to the conveyor and sending the signal,the duration of waiting for the
PCB feeding
Open Cover to Cut Off Motors:
this is to prevent any body damage during picking and placing. if set value 0, in the
mounting process when open the cover, the machine will turn to Step mode to do the mounting, due to the safety
Warning: the values are already set up before shipping, no extra
adjustment is required. There is a risk to lead to malfunctional
condition, please kindly contact technical engineer before
operation.
