40
Zhejiang Neoden Technology Co., Ltd
according to the actual situation
3. Nozzle and IC camera center position
Nozzle 1 front IC Central Position: click to align,nozzle 1 will move to front IC camera and take photos. Once the photo is
displayed, to align the central position of nozzle with white crosshair and save the data.(P.S. Once the Nozzle 1 front IC
Central Position, nozzle 2-6 central position will be changed based on nozzle 1.) Apply the same operation for Nozzle 2
front IC Central Position and Nozzle 6 front IC Central Position.
4.
Trash Box Position:
after Administration Login, click to align the position of trash box accordingly.
5.
Placement Head Reset Position:
after Administration Login, click to align the position of Placement Head Reset
accordingly.
6.
Exchange Nozzle Position:
after Administration Login, click to align the position of exchanging nozzles accordingly.
7. Automatic calibration
Check Nozzle Position
：
Check the position of nozzle 1-6 in the center of the front IC camera. Click this button, 1-6 nozzles
will act automatically and display in this interface
Automatic positioning of nozzle:
It can realize the automatic positioning of nozzle and front IC camera.
Left and right mark camera positioning:
this function is currently under development.
Front and rear IC camera angle:
the camera may have an angle when the equipment is installed. This function can
automatically measure the angle of the front IC camera to improve the mounting accuracy. Click this button, the nozzle 1
takes the mark point and acts. After the action is completed, click return, and the automatically measured data will be
synchronized to the initial angle of the front IC camera in the right basic configuration.
