19
Zhejiang Neoden Technology Co., Ltd
It means the size of mark point, it has a floated value, which can prevent recognizing mark point wrongly.
（
3
）
Light source
Light source divide into inner
、
middle
、
outer
、
inner and middle
、
middle and outer, whole lights. The user can make
adjustments accordint to fiducial point recognition situation.
（
4
）
Brightness
The user can adjust the brightness when align the fiducial point according to actual situation.
Selection of light source and brightness: The user can lock the location of the fiducial point through the XY position lock
interface, select the light source and brightness through the recognition of the Mark camera on the right, and fill the
corresponding parameters into the mark point information.
（
5
）
Range
If there are interference points near the Mark point, you can input a certain value and ensure identify the Mark point more
accurately.
（
6
）
Circle Degree
Input reasonable circle degree value,can avoid interference from other points effectively.
（
7
）
Mode
Dividing into white point and black point, select black point mode if have hole and bright point,select white point mode if
have bright point.
（
8
）
Camera
Support select left camera and right camera(user can select the camera for calibration according to the actual situation),also
can select default setting camera. If user select camera that can’t reach the position, the machine will use corresponding
camera during work.
（
9
）
Mark point add and delete
Click “new” to add new fiducial point(base on mode of the latest fiducial point). Click ”delete” to remove the selected
fiducial point you want.
4.2 Component list setting
Function: display the information and mounting order of components. The components’ quantity and mounting information
can be added through manual programming or importing files , see below figure:
