39
Feed Test
: feeding component, this is used to test if the feeder could feed components smoothly.
Size Measurement
：
after setting up the pickup position, pick height and nozzle, click Size Measurement, the machine
will measure the length and width of component according to the recognized photo, if the dimension is correct, click to
save the the data.
Size Information
：
After entering the length and width, the component will be identified by laser camera. For those tall
components,please enter the thickness. Size Recognize function is optional, once it’s ticked, if the components aren’t
within size offset tolerance, machine will throw the component and retry.
After finishing above settings, click Component Assign to Feeder, then these changes will be applied into Component List.
Click to save it.
8. Nozzle Information
This interface will record which kind nozzle be installed on each nozzle head.
