17
position, cylinder will raise the PCB,then thimble 2 will go down,PCB feeding phase 2 is completed.After above placement
is completed, the PCB in the waiting area is released, feed to cylinder thimble 3 position, cylinder will raise the PCB,then
thimble 3 will go down,PCB feeding phase 3 is completed.
4.2 PCB Eject setting
After click “Eject”no matter under Mag fixture or Track mode,the thimble will go down in “track section 2”,track section
2 and 3 begin to work and PCB will feed to back above the sensor position. If
there’s SMT conveyor connected and release signal to pnp machine,PCB will be automatically transit into SMT conveyor.
5. Panelized PCB Edit
5.1 Panelized PCB origin (SMD1 coordinate)
Function: This is mainly to determine the first component on single or panelized PCB of manual program or imported file.
The principle is to collect and calculate the data of each board’s relative spacing, in order to achieve the calculation of the
real coordinate.
