24
Min, max value
：
It means the size of mark point, it has a floated value, which can prevent recognizing mark point
wrongly.
Flash
：
Light source divide into inner
、
middle
、
outer
、
inner and middle
、
middle and outer, whole lights. The user can
make adjustments according to fiducial point recognition situation.
Brightness
：
The user can adjust the brightness when align the fiducial point according to actual situation.
Range
：
If there are interference points near the Mark point, you can input a certain value and ensure identify the Mark
point more accurately.
Circle Degree
：
Input reasonable circle degree value,can avoid interference from other points effectively
。
Mode
：
Dividing into white point and black point, select black point mode if have hole and bright point,select white
point mode if have bright point.
Camera
：
Support select left camera and right camera(user can select the camera for calibration according to the actual
situation),also can select default setting camera. If user select camera that can’t reach the position, the machine will use
corresponding camera during work.
Mark point add and delete
：
Click “new” to add new fiducial point(base on mode of the latest fiducial point).
Click ”delete” to remove the selected fiducial point you want.
6.3
Component list setting
Function: display the information and mounting order of components. The components’ quantity and mounting information
can be added through manual programming or importing files , see below figure:
