Chapter 3: Get To Know NEO
Removing the Battery Pack
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
29
3.2.2
Removing the Battery Pack
Refer to “Installing the Battery and Switching the Unit On” on page 11.
3.2.3
Battery Swap Time
Assuming the default power saving parameters and battery reserve level have not been al-
tered, battery swap time is 10 minutes—you will not lose data if the battery is replaced
within this time frame.
The
Suspend Threshold
feature allows you to determine the battery capacity at which the
hand-held will be shut down. If left at the default value,
Maximum Operating Time
, the unit
will run until the battery is completely empty; the RAM is only backed up for a short period
of time. If you choose
Maximum Back Time
, the hand-held shuts off with more energy left in
the battery so RAM can be backed up for a longer period of time.
(Refer to “Suspend Threshold” on page 150 for details about reserving battery power for
data backup purposes.)
3.2.4
Charging The Battery
Batteries shipped from the factory are charged to approximately 40% of capacity. They must
be fully charged prior to use.
3.2.4.1 Charging Options
Lithium-ion batteries must be charged before use. These batteries can be charged with a
variety of adaptors and docking stations. These include:
•
AC Wall Adaptor (Model No. PX3012) – operates as an AC power source and when
used in conjunction with PX3001 or PX3054, also charges the battery installed in
the unit.
•
Cigarette Lighter Adaptor (Model No. PX3056) – when used with a USB/DC Power
Adaptor (Model No. PX3054).
Important: To protect against data loss, NEO is equipped with a sensor; this sensor
detects when the battery door is opened and automatically places the hand-
held computer into suspend mode so that you can safely remove the battery.
Important: FOR DETAILED INFORMATION about charging options, refer to
Chapter 7: “Peripheral Devices & Accessories”.
