Chapter 2: Basic Checkout
Performing a Cold Reset to the Windows Mobile 6.1 OS
NEO Hand-Held with Windows Mobile 6.1 User Manual
23
Files and data stored in the RAM Drive partition are
not
preserved during a reset. To protect
files stored in the RAM Drive through a reset procedure, you must create a Total Recall
profile (refer to “Total Recall” on page 162) and store it on the flash (“My Device”) file
system.
•
Press and hold down the
[FN/BLUE]
key and the
[ENTER]
key simultaneously for a
minimum of two seconds. When the screen goes blank, release the keys.
2.9.2
Performing a Cold Reset to the Windows Mobile 6.1 OS
A
cold
reset in Windows Mobile is almost identical to a warm reset, except that some lower
level hardware (PCon) is also reset before the operating system boots. For this reason, a cold
reset should only be used in rare, critical situations.
To perform a cold reset and launch the Windows Mobile 6.1 operating system (bypassing
the BooSt menu):
•
Press and hold down the
[SCAN] [FN/BLUE]
and
[ENTER]
keys simultaneously for a
minimum of two seconds.
After a cold reset, the BooSt menu appears, listing possible BooSt commands.
•
Type
1
to load the Windows Mobile 6.1 operating system.
Note: You do not need to reset NEO after configuring the radio.
