Appendix C: Bar Code Settings
Code 39
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
C
-21
Add AIM ID Prefix
The
AIM ID
(Association for Automatic Identification and Mobility) is an international bar
code identifier. When this parameter is enabled, the
AIM ID
is inserted at the beginning of
the decoded bar code.
Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser
begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which
you can enter a value from
0
to
2550
milliseconds. A value of
0
(zero) disables the aiming
dot.
C.3.3
Code 39
Enable
Setting this parameter to
on
enables “Code 39”.
Full ASCII
If this parameter is enabled, the char, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting, Extended, allows for increased reading distance.
Start/Stop Transmit
Setting this parameter to
on
enables the transmission of start and stop characters, which are
usually not transmitted. Code 39 can start and end with either a * or a $ character (see also
next parameter, “Accepted Start Char”).
Accepted Start Char
This parameter allows the user the option of using one of the two start/stop characters or
both ($ char, * char, $ and * char).
Check Digit Verification
Uses the specified algorithm of the option you've chosen to ensure the integrity of the
symbol data before transmitting. If the data does not contain that algorithm, the data is not
transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or Italian CIP.
