B
-30
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Appendix B: Teklogix Imagers Applet
MSI Plessey
Check Char
When this parameter is enabled, before data is output, the “Codabar” symbol integrity is ver-
ified based on a parity character that must be present in the code. If the parity character is not
part of the code, the code is not output. Keep in mind the parity character may not be part of
your output setup; in this case, this parameter should be turned
off
.
Check Char Strip
If you enable this parameter, a check character is stripped from the decoded bar code data.
Concatenation
“Codabar” supports symbol concatenation. When
Concatenation
is set to
on
, Codabar uses a
‘D’ stop character to indicate that data from that symbol should be concatenated with data
from the adjacent symbol with a ‘D’ start character.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
2 to 60.
B.5.12 MSI Plessey
Enabled
Set this parameter to
on
to enable MSI.
Enable Plessey
Set this parameter to on to enable Plessey.
Check Char
When this parameter is set to
on
, the integrity of a “MSI Plessey” symbol is checked to
ensure that it complies with specified algorithms.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
4 to 48.
Plessey Minimum and Plessey Maximum Length
These parameters apply to Plessey bar codes.The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s). Double-tapping on
