C
-32
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Appendix C: Bar Code Settings
Telepen
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set
L1 as Minimum Length or L1,L2,L3 as Fixed Length
.
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.3.17 Telepen
Enabled
Set this parameter to
on
to enable “Telepen”.
Format
This parameter allows you to set the bar code character format to either
ASCII
or Numeric
.
Minimum Length
Minimum lengths for the bar code can be set from
0 to 255
. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-9 for details.
C.3.18 GS1 DataBar
All
GS1 DataBar
bar codes encode a GTIN-12 or GTIN-13 in a 14-digit data structure. In
order to make the GTIN-12 or GTIN-13 a 14-digit data structure, a leading zero or zeros is
filled to the left of the GTIN.
Enable GS1 DataBar Omni, Expanded & Limited
GS1 DataBar Omni
and
GS1 DataBar Expanded
have omnidirectional scanning capability.
GS1 DataBar Limited
can only be scanned by a linear hand-held scanning device. They
