Chapter 7: Peripheral Devices & Accessories
Quad Docking Station Setup
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
223
The quad docking station permits each of the four docked NEOs to communicate with a
10/100 Base-T Ethernet network. It also provides sufficient power to operate the hand-helds
and charge their batteries.
7.8.1
Quad Docking Station Setup
Refer to instruction sheet
PN 1081342
for a checklist of startup steps. You can find this
instruction sheet on Teknet. Go to
www.psionteklogix.com
. Tap on
Teknet
and enter your
user name
and
password
. If you’re not already a member, you will be asked to register free
of charge.
7.8.2
Quad Docking Station Indicators
The quad dock is equipped with a power indicator LED and RJ45 link and traffic
indicator LEDs. When a valid link is established, a green LED is illuminated next to
the RJ45 connector.
7.8.3
Inserting a NEO in the Quad Docking Station
•
Slide NEO into the cradle portion of the quad dock until lightly latched.
The LED on the hand-held unit lights up to show it has external power and may start charg-
ing the battery.
Interaction with NEO while in the quad dock is a function of the user application software
used to communicate with the host network.
7.8.4
Network Access
The quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held
units. The hand-helds are connected to an internal USB hub. The hand-held unit automati-
cally detects insertion into a quad docking station and loads the appropriate drivers to
communicate with the USB/Ethernet converters.
Note: The quad docking station is shipped with a user manual. It is critical that this man-
ual be reviewed for additional information and updates.
Important: The Ethernet connection on the quad docking station is designed for indoor
use only!
