B
-32
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
Appendix B: Teklogix Imagers Applet
Matrix 2 of 5
B.5.15 Matrix 2 of 5
Enabled
Set this parameter to
on
to enable “Matrix 2 of 5”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 80.
B.5.16 IATA 2 of 5
Enabled
Set this parameter to
on
to enable “IATA 2 of 5”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 48.
B.5.17 Discrete 2 of 5
Enabled
Set this parameter to
on
to enable “Discrete 2 of 5”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 48.
B.5.18 Telepen
Enabled
Set this parameter to
on
to enable “Telepen”.
Enable AIM Output
If you set
Enable AIM
Output to
on
, the imager reads symbols with start/stop pattern 1 and
decodes them as standard full ASCII (start/stop pattern 1). If you set this parameter to
off
,
