Chapter 6: Settings
Scancode Remapping
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
119
The
Remap Scancode
dialog box is displayed.
•
Type the scan code in hexadecimal in the field labelled
Scancode
.
Virtual Key, Function and Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scan code
will be remapped to:
Virtual Key, Function
or
Macro
.
When
Virtual Key
is selected, you can choose to force [SHIFT] to be on or off when the
virtual key is sent. If
No Force
is selected, the shift state is dependent on whether the shift
state is on or off at the time the virtual key is sent.
When
Function
is selected, a list of valid functions appears in the dialog box.
When
Macro
is selected, the macro keys available on your unit are listed in the dialog box.
•
Choose
Virtual Key>Function
or
Macro
.
•
Choose a function from the
Function list
, and tap on
OK
.
Editing a Scancode Remap
•
In the
Scancode Remapping
tab, tap on the remap you want to edit.
•
Tap on the
Edit
button, and make the appropriate changes.
•
Tap on
OK
to save your changes.
Removing a Remap
•
In the
Scancode Remapping
tab, highlight the scancode you want to delete, and tap on
the
Remove
button.
Note: The ‘Label’ field displays the default function of the scancode you
are remapping.
