Chapter 6: Settings
Bar Code Settings – The Scanner Menu
NEO Hand-Held with Windows Mobile 6.1 Classic User Manual
157
6.31.1 Bar Code Settings – The Scanner Menu
The drop-down menu to the right of the
Scanner
option allows you to choose from one of
the following:
Decoded (internal)
and
Decoded (Intermec ISCP)
. If an HHP 5000 imager is
installed in your unit, refer to Appendix B: “Teklogix Imagers Applet” for details about
setting up your imager.
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.
6.31.2 Options Tab
This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.
6.31.2.1 Double Click Parameters
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is con-
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this
feature.
A double-click produces different results depending on whether or not a value is assigned in
the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-click-
ing the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and
Important: Appendix C: “Bar Code Settings” provides descriptions of the bar codes
listed in the scanner menus.
