NEC VersaDayLite User Manual Download Page 98

Page: 98 / 155

Using External Devices 8-3

External Audio Options

The NEC Versa notebook comes equipped with built-in audio ports that let you record
and play sound.

Connect audio jacks, like a microphone, headphones, or external speakers to the audio
ports as follows.

Locate the audio port that you want to use.

Plug the jack into the appropriate port on the right side of the NEC Versa
notebook.

Audio ports

– Headphone/External Speaker Jack

– External Microphone Jack

Note

If you are using external speakers or an external microphone and experience

sound distortion or feedback, use the

Fn-F11

key to lower the volume.

Some feedback is caused by having the microphone and speakers too close to each
other, so moving the external audio option away from the unit may also help.

Summary of Contents for VersaDayLite




























































































































































Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands

NEC VersaDayLite, User Manual

Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands