NEC VersaDayLite User Manual Download Page 97

Page: 97 / 155

8-2

Using External Devices

External Monitor

You can add a standard external monitor to your NEC Versa DayLite system using a
display signal cable (usually provided with the monitor) and a monitor transfer cable.

Follow these steps to connect an external monitor to your NEC Versa notebook.

Check that power to both the NEC Versa notebook and the monitor is off.

Open the monitor port cover on the left side of the system.

Attach the monitor transfer cable connector to the monitor port on the system.

Connecting a monitor

Connect the monitor cable to the transfer cable.

Connect the monitor power cable and plug it into a properly grounded wall outlet.

Follow any setup instructions in the monitor's user's guide.

Turn on power to the system and the monitor.

Press

Fn-F3

to toggle through the video modes: LCD, CRT, or both.

Summary of Contents for VersaDayLite




























































































































































Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands

NEC VersaDayLite, User Manual

Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands