NEC VersaDayLite User Manual Download

Page: 36 / 155

3-2

Using the BIOS Setup Utility

Introducing BIOS Setup

Your NEC Versa DayLite computer comes with a hardware program called BIOS
Setup that allows you to view and set system parameters. BIOS Setup also allows you
to set password features that protect your system from unauthorized use.

Use BIOS Setup to:

set the current time and date

customize your operating system to reflect your computer hardware

secure your system with a password

Entering BIOS Setup

Access the BIOS utility at power-on. Just press

when the following prompt appears.

Press <F2> to Enter Setup.

When you press

to enter BIOS Setup, the system interrupts the Power-On Self-Test

(POST) and displays the current CMOS RAM settings.

If the system detects an error during POST, it prompts you with a double beep and a
message: “Press <F1> to resume.” If you press

, the system enters BIOS Setup

automatically. If you want to fix the error, carefully read the error message that appears
above the prompt (taking notes if you want), and press

. You will see this message if

your CMOS battery becomes fully discharged.

Summary of Contents for VersaDayLite




























































































































































Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands

NEC VersaDayLite, User Manual

Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands