NEC VersaDayLite User Manual Download Page 29

Page: 29 / 155

Getting Started 2-9

Clean the battery connectors with a dry cloth when they get dirty.

Keep the battery out of the reach of children.

Replacing the Battery

The following symptoms indicate that battery life is nearing an end. Replace batteries
that display these symptoms.

Shorter work times.

Discoloration, warping.

Hot to the touch.

Strange odor.

Replace the secondary battery installed in your NEC Versa notebook system as follows.

Note

Use the batteries in the NEC Versa notebook computer for which they are

designed. Installing another manufacturer’s battery, or using a combination of very old
and new batteries can deteriorate battery and equipment performance.

Save your files, exit Windows and turn off system power.

Close the LCD panel and turn over the system.

Slide the battery release latch toward the right side of the system and hold firmly.

Locating the battery bay release latch

A – Battery Release Latch

Summary of Contents for VersaDayLite




























































































































































Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands

NEC VersaDayLite, User Manual

Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands