3-20
Using the BIOS Setup Utility
Identifying the Switch Settings
The following list identifies each switch setting and its function.
!
Switch 1 — Password override — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to
“ON” and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 86 key keyboard and “OFF”
for European keyboard.
!
Switch 3 — Not assigned; must be “OFF.”
!
Switch 4 — Keyboard select 2; Default is “ON” for US and “OFF” for European
keyboards.
!
Switch 5 — Reserved for factory use; Default is “ON.”
!
Switch 6 — Logo select; Default is “OFF.”
Default switch settings
Note
The system memory expansion slot is also located here. Therefore, if you
need to install/replace SO-DIMM modules, you might want to do so when the system is
already disassembled.
1.
Replace the memory module bay cover and screw.
2.
Turn over the system.
3.
Follow the instructions earlier in this chapter, “Performing the BIOS Update.”
Summary of Contents for VersaDayLite
Page 96: ...8 Using Peripheral Devices External Monitor External Audio Options USB Devices ...
Page 100: ...9 Using Multimedia Audio Video Multimedia Applications ...
Page 105: ...10 Solving System Problems Problem Checklist Start Up Problems If You Need Assistance ...
Page 122: ...B Specifications System Components Memory Map Interrupt Controllers ...