NEC VersaDayLite User Manual Download Page 37

Page: 37 / 155

Using the BIOS Setup Utility 3-3

BIOS Setup Main Menu

After you press

, the system displays the BIOS Setup Main Menu screen, similar to

the following.

Main Setup Menu

How to Use Setup

The Setup utility has a Main Menu window and five top-level menus with submenus.
The menu bar at the top of the Main Menu window lists the following top-level menus.

Main



Use the Main menu for basic system configuration. For example, select

Main to set the system time and date, set diskette and hard disk parameters, or
check memory parameters.

Advanced



Use the Advanced menu to set LCD panel view, I/O device

configuration (including IR serial port) and more.

Security



Use this menu to set User and Supervisor passwords, password on boot,

fixed disk boot sector.

Boot — Use this menu to set boot sequence.

Exit



Exits the Setup utility with various save or discard options.

Summary of Contents for VersaDayLite




























































































































































Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands

NEC VersaDayLite, User Manual

Search results

Summary of Contents for VersaDayLite

Reviews:

Related manuals for VersaDayLite

Brands by name

Popular brands