NEC Versa LX, Service And Reference Manual

Page: 40 / 138

2-16 System Configuration and Setup
BIOS Setup Parameters
Parameter Default Setting Alternate Setting(s)
4th Boot Device
6
1
st
Fnd IDE Disabled/Floppy/SuperDsk
/CDROM
Try Other Boot Devices Yes No
1
st
IDE Hard Drive Internal VersaBay/DS Internal
DS VersaBay
2
nd
IDE Hard Drive VersaBay Internal/DS Internal
DS VersaBay
3
rd
IDE Hard Drive DS Internal Internal/VersaBay
DS VersaBay
4
th
IDE Hard Drive DS VersaBay Internal/VersaBay/DS Internal
Peripheral Setup
Internal Hard Drive Enable Disable
USB Controller Disabled Enabled
Serial Port Auto Disabled/(PnP OS Setup
7
)
COM1,IRQ4/COM2,IRQ3
COM3,IRQ4/COM4,IRQ3
Parallel Port Auto Disabled/LPT1/LPT2
(PnP OS Setup
7
)
Parallel Mode ECP Uni-Dir/Bi-Dir EPP
IR Serial Port Disabled Auto/(PnP OS Setup
7
)
COM2,IRQ3/COM3,IRQ4
COM4,IRQ3
Notes
1
These setup items are only visible when system is docked.
2
Supervisor password has to be previously set up.
3
Only active after a password is set up.
4
Available when power savings is set to custom.
5
Resume alarm time is selectable when wake up from suspend alarm is set.
6
Bootable device when set to IDE Hard Drive. Only one IDE device is allowed to be bootable.
7
Appears only when configured by the Windows 95 device manager.
8
Appears only on AGP systems.
BIOS Setup Menus
Read the following descriptions for explanations of items that appear in the
BIOS Setup menus, as listed in the preceding table. See the item-specific help
that appears on each Setup screen for more details.
Standard CMOS Setup
When you select the Standard CMOS Setup screen you see System Time and
System Date parameters as well as drive parameters.
„
Date — Set your NEC Versa’s calendar month, day and year. The
calendar clock is year 2000-compliant. These settings remain in memory
even after you turn off system power.