System Configuration and Setup 2-3
AC Adapter
A – AC Adapter
B – AC Power Cable
Note:
Check that the AC outlet voltage falls in the range
of 100-240 Volts AC. Verify that the cord and plug are
appropriate for your AC source.
Connect the AC adapter as follows:
1.
Connect the AC adapter cable to the power port on the back of your NEC
Versa.
2.
Plug one end of the AC power cable into the AC adapter and the other end
into a properly grounded 120- or 240-volt wall outlet.
Note:
The AC power cable type that your system uses
depends on the country where you are using it. Contact the
local dealer to purchase the correct power cable.
Connecting the AC Adapter
A – AC Adapter
B – Power Port
Summary of Contents for Versa LX
