3-20 Disassembly and Reassembly
4.
Remove one screw (
B
) to release the connector board from the bottom
assembly.
A – Screws
B – Connector CP8
Bottom Base Assembly
There are doors and tilt feet on the bottom assembly.
All doors snap in and out.
To remove the tilt feet open the foot and slightly compress the four
sections together and snap out.
Disassembly – Non-User Replaceable Drive System
Use the following procedures to disassemble the non-user replaceable hard disk
drive system.
CPU Assembly
Remove the CPU assembly as described in the following procedure.
Summary of Contents for Versa LX
