![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030063.webp)
Chapter 1 CCIS FEATURES
1-49
NWA-088654-001 Rev.1.0
94ch1002.fm
CCIS BASIC PROGRAMMING
• For closed numbering system
DESCRIPTION
DATA
Assign the access code for LCR Group 3.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A129: LCR Group 3
Assign an Area Code Development Pattern
number to the LCR Group selected above.
•
(1)
(2)
Y=A000
0-3: LCR Group 3
4005-4007: Area Code Development Pat-
tern No. 5-7
Assign a Route Pattern number to the digits to
be dialed in the Area Code Development Pat-
tern number assigned by CM8A Y=A000.
NOTE:
The digits assigned in CM20 to
A129: LCR Group 3 must be entered
in the Area Code Development Pat-
tern table for access to the desired
Route Pattern number.
•
(1)
(2)
Y=4005-4007 Area Code Development
pattern No. 5-7
X-X---X: Area Code 1-8 digits
0000-0255: Route Pattern No. 000-255
Assign an area code (station number) for intra-
office station, if required.
•
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-X---X: Area Code 1-8 digits
8001-8008: 1-8 digits Intra-Office Station
Specify the LCR selection priority for the
Route Pattern number assigned by CM8A
Y=4005-4007.
•
(1)
(2)
Y=0000-0255
Route Pattern No. 000-255
1: 1st priority
2: 2nd priority
3: 3rd priority
4: 4th priority
XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
For area code deletion, designate the digits to
be deleted.
•
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
153: Number of digit to be deleted
00
: No digit deletion
01-10
: First 1-8 digits deletion
NONE : No digit deletion
START
CM20
CM8A
A