![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030238.webp)
Chapter 1 CCIS FEATURES
1-224
NWA-088654-001 Rev.1.0
94ch1006.fm
SINGLE-DIGIT STATION CALLING-CCIS
• For Satellite Office
Operating Procedure
To place a Single-Digit Station Call:
1. Lift the handset and receive dial tone.
2. Dial the Single-Digit preprogrammed station number.
3. The called station will be rung.
DESCRIPTION
DATA
Assign the single-digit station number to LCR
Group 3 (A129).
•
(1)
(2)
Y=0-3 Number Plan Group 0-3
X-XXXX: Access Code
A129: LCR Group 3
Assign an area code table to be used to select a
route pattern table.
•
(1)
(2)
Y=A000
3: LCR Group 3
4005-4007: Area Code Development Pat-
tern No. 5-7
Assign the same digit which was assigned as
the access code (in CM20) into the selected
area code table.
•
(1)
(2)
Y=4005-4007
X-XXXX: Access Code
0000-0255: Route Pattern No. 000-255
Assign the next Route Pattern number to the
Route Pattern number assigned CM8A
Y=4005-4007.
NOTE:
This data is required to expand the
order of LCR selection that is as-
signed by CM8A Y=0000-0255.
The order of LCR selection can be
expanded to the maximum seventh.
•
(1)
(2)
Y=0000-0255 Route Pattern No. 000-255
0: Designation of next table
0000-0255: Next Route Pattern No. 000-
255
Assign the route pattern table with the desired
properties and selection of appropriate routes.
•
(1)
(2)
Y=0000-0255
1-4: Order of LCR Selection
1: 1st
2: 2nd
3: 3rd
4: 4th
XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
START
CM20
CM8A
END