Chapter 2 Q-SIG FEATURES
2-16
NWA-088654-001 Rev.1.0
94ch2001.fm
PRT ASSIGNMENT
DESCRIPTION
DATA
Assign Circuit Identification Code (CIC) to
each trunk number used for B channel.
NOTE 1:
The Circuit Identification Code
(CIC) represents a circuit number to
designate a trunk (of each trunk
route) used as a B channel in the No.
7 CCIS network. A CIC should not
be assigned to a trunk used as a
Common Signaling Channel.
NOTE 2:
This command must be assigned
after CM35 Y=090 and CM35
Y=091 are assigned.
•
(1)
(2)
Y=35
000-511: Trunk No.
001-127: CIC
Assign the trunk number to be used as the com-
mon signaling channel.
•
(1)
(2)
Y=00
00-63: CCH No.
000-511: Trunk No. assigned by CM10
Y=00
Assign an Originating Point Code (OPC) to
each CCH number.
NOTE:
The Originating Point Code (OPC)
is used to designate an originating
office in the No. 7 CCIS network. A
single OPC should be assigned to
all CCH numbers provided in the
same system.
•
(1)
(2)
Y=01
00-63: CCH No.
00001-16367: Originating Point Code
D
CM30
RESET
CMA7
RESET
E