![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030172.webp)
Chapter 1 CCIS FEATURES
1-158
NWA-088654-001 Rev.1.0
94ch1005.fm
DIRECT-IN TERMINATION-CCIS
• When no release signal arrives on the IC trunk.
DESCRIPTION
DATA
Provide the Direct-In Termination-Outside (In
the case of no release signal on incoming trunk
and both answer and release signals on outgo-
ing trunk).
(1)
(2)
324
0 : After the outgoing trunk receives the
response, the tandem connection is
allowed
1 : The tandem connection is restricted
when the incoming trunk is no restora-
tion signal
Assign the data for terminating system in Day
Mode, Night Mode, Mode A and Mode B for
the trunk, respectively.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-511: Trunk No.
04: Direct-In Termination
Assign the Abbreviated Code of a station
number for the Direct-In Termination to
originate a call to the destination via CCIS, in
Day Mode, Night Mode, Mode A and Mode B,
respectively.
•
•
•
•
(1)
(2)
Y=04 Day Mode
Y=05 Night Mode
Y=42 Mode A
Y=43 Mode B
000-511: Trunk No.
CXX
XX: 00-99: Abbreviated Code of Station
number for Direct-In Termina-
tion in Day Mode assigned by
CM71>66
Assign trunk route data to the trunk route num-
ber (for IC route).
•
(1)
(2)
Y=002 IC/BW
00-63: Trunk Route No.
1 : Incoming Trunk
3 : Bothway Trunk
•
(1)
(2)
Y=005
Release Signal from Distant Office
00-63: Trunk Route No.
0: Release signal does not arrive
•
(1)
(2)
Y=009 Incoming Connection Signaling
00-63: Trunk Route No.
15 : Ring Down
START
CM08
CM30
CM35
BLADE RESET
A