![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030224.webp)
Chapter 1 CCIS FEATURES
1-210
NWA-088654-001 Rev.1.0
94ch1006.fm
PAGING ACCESS-CCIS
DESCRIPTION
DATA
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
answering a trunk call.
•
(1)
(2)
Y=60
X-XXXXXXXX: Station No.
1: Not stored
For the station connected to PGD(2)-U10
ADP, set the call history not to be stored when
handling an unanswered trunk call.
•
(1)
(2)
Y=61
X-XXXXXXXX: Station No.
1: Not stored
Allow the accommodation of PGD(2)-U10
ADP.
•
(1)
(2)
Y=63
X-XXXXXXXX: Station No.
0 : To accommodate
1 : Not accommodated
NOTE 1:
Set this data only for a Base Port of DLC blade.
NOTE 2:
Whether the following equipment can be accommodated to the same DLC blade or not
depends on this data.
- When the second data is set to “0”
Accommodatable
: DT300/DT400/D
term
85/PGD(2)-U10 ADP
Unaccommodatable: DESKCON/DSS Console
- When the second data is set to “1”
Accommodatable
: DT300/DT400/D
term
85/DESKCON/DSS Console
Unaccommodatable: PGD(2)-U10 ADP
NOTE 3:
When the second data is set to 0, and accommodating DT300/DT400 Series DESI-less to
the same DLC blade to which PGD(2)-U10 ADP is accommodated, the Line Key of the
DT300/DT400 Series DESI-less does not light up (however, Character Display or Icon
Display on the DESI-less screen is provided).
Assign the kind of PGD(2)-U10 station (CH1).
NOTE:
When this command is set, PGD(2)-
U10 needs to reset (Blade Reset or
pull out and reconnect the modular
connector of the Multiline Termi-
nal).
•
(1)
(2)
Y=65
X-XXXXXXXX: Station No.
1: Paging
A
CM13
BLADE RESET
CM12
B