![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030290.webp)
Chapter 2 Q-SIG FEATURES
2-14
NWA-088654-001 Rev.1.0
94ch2001.fm
PRT ASSIGNMENT
DESCRIPTION
DATA
Assign a trunk route to each Q-SIG trunk used
for B channel (voice channel), and also to D
channel (signaling channel).
NOTE 1:
PRT route must be separated from
any analog trunk route.
NOTE 2:
The trunk routes for D channel must
be different from the trunk routes for
B channel.
•
(1)
(2)
Y=00
000-511: Trunk No. assigned by CM10
Y=00
00-63: B channel Trunk Route No.
•
(1)
(2)
Y=00
000-511: Trunk No. assigned by CM10
Y=00
00-63: D channel Trunk Route No.
Assign the trunk route data to each Q-SIG in-
coming trunk used for B channel only.
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
000-511: Trunk No. assigned by CM10
Y=00
31: Handling of busy
Assign the trunk route data to the B channel
trunk route number assigned by CM30 Y=00.
NOTE:
CM35 Y=000, 004, 005, 009, and
020 should be assigned to only the B
channel trunk routes.
For D channel trunk route, no data
setting is required.
•
(1)
(2)
Y=000 Kind of Trunk Route
00-63: B channel Trunk Route No.
04: Tie Line trunk
•
(1)
(2)
Y=004 Answer signal from distant office
00-63: B channel Trunk Route No.
2: Answer signal arrives
•
(1)
(2)
Y=005 Release signal from distant office
00-63: B channel Trunk Route No.
1 : Release signal arrives
•
(1)
(2)
Y=009 Incoming connection signaling
00-63: B channel Trunk Route No.
03: Wink Start/CCIS
•
(1)
(2)
Y=020 Outgoing connection signaling
00-63: B channel Trunk Route No.
00: Wink Start/CCIS
B
CM30
BLADE RESET
CM35
BLADE RESET
BLADE RESET
C