![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030107.webp)
Chapter 1 CCIS FEATURES
1-93
NWA-088654-001 Rev.1.0
94ch1003.fm
CALL FORWARDING-BUSY LINE-CCIS / MULTIPLE CALL FORWARDING-BUSY LINE-CCIS
DESCRIPTION
DATA
Allow the tandem connection to the incoming/
outgoing trunk route.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
0: Allow
Allow Call Forwarding-Outside-CCIS.
(1)
(2)
370
1 : Allowed
Specify the Call Forwarding-Busy Line-Out-
side setting operation.
(1)
(2)
222
0 : Setting when the station goes on-
hook/when receiving Service Set Tone
(PBR time out)
1 : Setting when receiving Service Set
Tone (PBR time out)
Specify whether or not to prioritize Station
Hunting over Do Not Disturb at receiving an
internal incoming call, when the Pilot station
of a Station Hunting group is set Do Not Dis-
turb./Specify whether to transfer to the destina-
tion of Call Forwarding-Busy Line or of Do
Not Disturb by CM51 Y=10, when the station
is set Do Not Disturb during setting Call For-
warding-Busy Line.
(1)
(2)
240
0 : To prioritize Station Hunting/To the
destination of Call Forwarding-Busy
Line
1 : To prioritize Do Not Disturb/To the
destination of Do Not Disturb by
CM51 Y=10
Assign whether an extension can set the desti-
nation of Call Forwarding-Busy Line-Outside
by entering only a trunk access code.
(1)
(2)
386
0 : Restricted
1 : Allowed
Allow or restrict Multiple Call Forwarding-All
Calls/Busy Line/No Answer-CCIS for each
CCH number.
•
(1)
(2)
Y=29
00-63: CCH No.
0 : Allowed (Maximum 7 times)
1 : Restricted (Only once)
Specify the number of times of Multiple Call
Forwarding-All Calls/Busy Line/No Answer-
CCIS.
(1)
(2)
72
01-07: 1 time-7 times
If no data is set, the default setting is 5
times.
A
CM36
CM08
CMA7
CM42
B